Panasonic VL-VN1800, Руководство по установке

Страница: 48 / 68

IP Address for main unit
1.
Select the method for setting the IP address information.
•
Obtain an IP address automatically
•
Use the following IP address
2.
If you selected Use the following IP address , specify the following settings.
•
IP Address: Enter the IP address for the Control Box.
•
Subnet Mask: Enter the subnet mask of the LAN.
•
Default Gateway: Enter the IP address of the LAN’s default gateway.
IP Address for DNS server
1.
Select the method for setting the IP address information.
•
Obtain DNS server address automatically
•
Use the following DNS server address
2.
If you selected Use the following DNS server address , specify the following settings.
•
Preferred DNS IP Address: Enter the IP Address of the preferred DNS server.
•
Alternative DNS IP Address: Enter the IP Address of the alternative DNS server.
IP Address for DSP
1.
Select the method for setting the IP address information.
•
Obtain DSP IP address automatically
•
Use the following DSP IP address
2.
If you selected Use the following DSP IP address , specify the following items for DSP Card #1 .
•
IP Address1: Enter the IP Address 1 of the DSP card.
Import File
On this screen, you can import 5 types of files configured for the Control Box in CSV format.
5.4.2 After Quick Setup Wizard has been Completed
Changing IP Address Settings
•
Do not change the IP address of the Control Box once IP telephones are registered to the Control Box
using the set IP address. The IP telephones will not operate properly if the IP address of the Control Box
is changed. When an external DHCP server is used to automatically assign IP addresses, it must be
configured to always allocate the same IP address to the Control Box. For details, consult your network
administrator.
IP addressing information for the Control Box can also be changed from Web Maintenance Console. For
details about programming IP addresses, refer to "16.1 Network Service—[1] IP Address/Ports—Basic
Settings" in the PC Programming Manual.
5.4.3 Enabling the DHCP Server Feature
This Control Box has a DHCP Server feature. When the feature is enabled, it allows you to centrally
manage and automate the assignment of IP addresses for the devices located in same LAN using Web
Maintenance Console.
1.
Click Setup → Network Service → Server Feature → DHCP .
5.4.2 After Quick Setup Wizard has been Completed
48 Installation Manual