4.3.4 Connecting 2 frames of a lobby station
using the extension cable
When connecting 2 frames of a lobby station together,
connect them using the VL-VM801 extension cable (sold
separately;
A
) as shown below.
Example: lobby station for camera module
´
1 pcs. +
button module
´
8 pcs. + blank panel
´
2 pcs.
(2 of the included flat cables will not be used)
A
4.3.5 Connecting the VIGIK panel (for France)
The lobby station is compatible with VIGIK installation.
Refer to the documentation of the VIGIK for information
about installation.
Required items
– VIGIK system (user supplied)
– Cable that connects the lobby station to the VIGIK
system (user supplied)
Supported sizes
When selecting a VIGIK system, select one that meets
the following guidelines.
Max. 9 mm
Max.
44 mm
Max.
36 mm
Max. 32 mm
Max.
25 mm
Max. 18 mm
1.
Remove the waterproof rubber from the panel, and
then remove the screws (
A
) on the left and right side
of the module and panel.
A
2.
As shown in the following illustration, securely attach
the VIGIK by following the instructions in the
documentation for the VIGIK.
R
The word "UP" should be facing up.
A
Waterproof rubber (included with the VIGIK
panel)
B
VIGIK reader (user supplied)
C
Attachment nut or similar part (supplied with
the VIGIK)
B
C
A
3.
Attach the VIGIK panel to the frame.
a.
As shown in the following illustration, attach the
VIGIK panel to the frame (
A
).
b.
Securely attach the cable (user supplied;
B
,
C
)
by following the instructions in the documentation
for the VIGIK.
c.
Align the protrusions of the cover with the holes
of the plate (
D
).
d.
Make sure to reattach the panel and module by
securing the screws (
E
).
A
E
B
C
D
D
D
27
4. Installation
