30
Using by groups
■
Settings before use
●
Monitor station and sub monitor station settings
(Default settings are all “Group A”.)
Using the unit
•
Group A and group B cannot both be used at the same time.
●
Camera settings (Default settings are all “ON”.)
After pressing
【
CALL
】
...
Press one of the buttons to the right of the screen in accordance with the screen
display.
(After the calling tone sounds, make the call.)
【
CALL
】
●
Calling tone
Same group: Two beeps (approximately 2 seconds)
Other group: Arpeggio (approximately 3 seconds)
•
If you call both groups together, the tones for
both groups will sound.
Screen
Indoor B group
call button
Indoor A + B group
call button
■
Calling from a door station
When the Ringer button at a door station is pressed ...
•
If the call is from door station 1
– The call will be transferred to the monitor station and sub monitor station that
have camera 1 set to “ON” and talking will be possible.
•
If the call is from door station 2
– The call will be transferred to the monitor station and sub monitor station that
have camera 2 set to “ON” and talking will be possible.
Make the settings separately for each monitor station and sub monitor station
using the indoor group settings in the menu. (Page 41)
Make the settings separately for each monitor station and sub monitor station by
selecting the cameras in the menu. (Pages 42, 43)
■
When calling the monitor station and sub monitor station
(The procedure is the same for a sub monitor station.)
Indoor A group
call button
