Panasonic VL-GM301A, Инструкция по установке и эксплуатации

Страница: 26 / 52

26
Using the unit
1
When a call is received from the door station, press 【 TALK 】 .
2
Speak to the visitor.
3
To end the conversation, press 【 TALK 】 .
• The display will turn off.
■
【
HOLD
】
mode (Press to talk mode)
1
When a call is received from the door station, press and hold
【
TALK
】
to speak to
the caller.
•
A beep will sound and the “PT” will light.
2
To listen to the visitor, release
【
TALK
】
.
3
To speak again, press and hold 【 TALK 】 .
4
To end the conversation, tap
【
TALK
】
.
Note:
•
Make sure you are within about 50 cm (20 inches) of the monitor station.
•
While the display is on, you can press
【
BRIGHT
】
to select the desired
brightness.
• If you do not answer a door call within 30 seconds, the display will turn off. If
you press
【 TALK 】 , the display will turn on again, and you can talk to the
visitor.
•
The conversation will be automatically disconnected in about 1 minute and 30
seconds (about 1 minute in
【
HOLD
】
mode). To resume the conversation, press
【
TALK
】
.
• At night or when there is not enough lighting in the doorway, the display will be
shown in black and white.
• Please push
【
PRESS TALK
】
when you want to change to
【
HOLD
】
mode in
【 PUSH 】 mode. “PT” will be displayed in LCD and it becomes 【 HOLD 】 mode.
It returns to the setting of 【 PUSH 】 mode after end of talk.
• Make sure you speak to the caller only while pressing 【 TALK 】 and release
【 TALK 】 when you have stopped speaking so that the caller can speak to you.
Note:
•
If the door station is installed in a noisy environment,
【
PUSH
】
mode may not
function properly.
■
【
PUSH
】
mode (Push to talk mode)
Available answer modes