96
Stereo / Bilingual Sound Selection (Analogue TV)
When you receive the stereo / bilingual sound system, sound output modes can be selected by using the [MPX] in the
Sound Menu.
Audio Signal
STEREO
MAIN I
SUB II
MONO
Mode Indicator
NICAM
.......Used in New Zealand, Singapore, Hong Kong etc.
Type of broadcast
Regular broadcast
(Standard Audio)
R NICAM MONO I
(MAIN I)
NICAM
STEREO
NICAM DUAL MONO
(MAIN I / SUB II)
Mode Indicator
No Indicator
I
II
A2 (German)
.......Used in Australia, Malaysia etc.
Type of broadcast
Regular broadcast
(Standard Audio)
BILINGUAL or DUAL MONO:
MAIN I / SUB II
STEREO
Mode Indicator
No Indicator
●
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching
occurs, it is recommended you switch from STEREO to MONO.
●
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
●
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position, using the
Sound Selection button.
●
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
Technical Information
