USB HDD / SD Card Recording
60
Setting for USB HDD / SD Card
Format and setup the USB HDD with this TV in order to use it for recording.
Depending on the conditions of the SD Card, the recording may not work properly. Formatting the SD Card with this TV
will resolve this problem. (All data will be erased when formatting.)
●
Before the settings, connect the USB HDD / SD Card (p. 59) and be sure to turn on the USB HDD.
●
Prepare the USB HDD for the exclusive use of recording with this TV.
Select [USB HDD Setup] or [SD Card Formatting] and set
USB HDD Setup
Recording Setup
Access
Access
SD Card Formatting
SD Card Information
Access
select
access
●
To check the information of the
inserted SD Card
[SD Card Information]
Setup the USB HDD [USB HDD Setup]
All the USB devices recognised as a mass storage device will be listed.
●
You can only choose one USB HDD for recording at a time.
●
You cannot change the settings for the USB HDD while recording is in progress.
●
Please note that USB HDD will be formatted and all data in it will be erased after this setup.
1
Select the USB HDD for recording and start setup
USB Drive A
USB Flash Disk
USB HDD Setup
Product
Name
select
access
●
Some USB HDD may not be displayed.
●
For the information of the highlighted device
2
Caution and confirmation of using USB HDD
Select [Yes] to proceed
The data recorded to the USB HDD with this TV can only
be played back on this TV.
You cannot playback it with other TV (including the TV
of the same model number) or any PCs.
If your TV is repaired due to a malfunction, the USB
HDD may not be available with your repaired TV.
Continue?
USB HDD Formatting
Yes
No
To use this device for recording,
it must be formatted first.
Continue?
USB HDD Formatting
Yes
No
This device will be formatted and
all contents deleted.
Are you sure?
USB HDD Formatting
Yes
No
select [Yes]
set
select [Yes]
set
select [Yes]
set
3
Confirmation of USB HDD name
USB HDD Formatting
Edit name?
Yes
No
Name : USB Drive A
select
set
The name for the USB HDD is created automatically. If you want to edit the name, select [Yes].
Set characters
Store
USB HDD 1
USB HDD
Name
select
set
●
You can set characters by using
numeric buttons. (English only)
(p. 104)
4
Confirmation to enable USB HDD for recording
If the formatted USB HDD for recording already exists, this confirmation screen will be displayed to switch to enable
this USB HDD for recording.
Do you want to enable this
device now for recording?
When disconnecting any USB device,
always use the "Safely Remove USB" function
in the USB HDD Device Setup menu to avoid
any corruption of recorded content.
USB HDD Formatting
Yes
No
select [Yes]
set
