Accessories / Options
Quick Start
Guide
7
Attaching the pedestal
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
●
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest
Panasonic dealer immediately.
During set-up, make sure that all screws are securely tightened.
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury may result.
Two or more people are required to install and remove the TV.
If two or more people are not present, the TV may be dropped, and personal injury may result.
●
●
●
●
●
Assembly screw (4)
(silver)
XYN5+F18FN
●
Assembly screw (4)
(black)
THEL060N
●
Pole (2)
L:TBLA3680
R:TBLA3679
●
Base
TBLX0123
●
M5 × 18
M5 × 25
L
R
Assembling the pedestal
Use the four assembly screws
to fasten the left and
right poles to the base securely.
Make sure that the screws are securely tightened.
Forcing the assembly screws the wrong way will strip
the threads.
“L” or “R” mark is stamped on the bottom of the pole.
●
●
●
A
R
D
L
Front
Securing the TV
Use the assembly screws to fasten securely.
Make sure that the screws are securely tightened.
Carry out the work on a horizontal and level surface.
●
●
D
B
Arrow mark
View from the bottom
Hole for pedestal
installation
Adjust the panel to your desired angle
•
Ensure that the pedestal does not hang over the edge
of the base even if the TV swivels to the full rotation
range.
•
Do not place any objects or hands within the full
rotation range.
(View from the top)
Set the mark at the centre as illustrated, to
have the swivel positioned at the centre of the
rotation angle.
10°
10°
406 mm
510 mm
