How to Use the Menu Functions
28
●
●
Menu
Item
Adjustments / Configurations (alternatives)
Setup
PC Setup
Input Resolution
Switches to a wide view
●
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
●
Options change depending on signals
Clock
Sets to the minimum level if noise occurs.
H-pos
Adjusts horizontal position
V-pos
Adjusts vertical position
Clock Phase
Eliminates flicker and distortion
●
Adjust after Clock adjustment
●
Set to the minimum level if noise occurs
Sync
• H & V
• SOG
PC sync signal type
[H & V]:
by the horizontal and vertical signals from your PC
[SOG]:
Sync on Green sync from your PC
Reset PC Settings
Press the OK button to reset the PC Setup settings to the default.
DVI Position
Settings
H-pos
Adjusts horizontal position settings of DVI
V-pos
Adjusts vertical position settings of DVI
Reset DVI Position
Settings
Press the OK button to reset the DVI Position Settings to the default.
Off Timer
• Off
• 15 / 30 / 45 / 60 / 75 / 90
minutes
Sets the time until the TV automatically goes to Standby mode
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode
●
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save], [Power
Save]
[On]
[Intelligent Auto Standby]
[On (No reminder)]
[Auto Standby]
[2 hours]
Child Lock
Locks a channel / AV input to prevent access to it (p. 34)
Tuning Menu
Favourites Edit
Creates lists of favourite channels (Digital TV mode) (p. 30)
Channel List
Skips the unwanted channels or edits channels (p. 31, 32)
Auto Tuning
Sets all Digital TV or Analogue TV channels automatically (p. 31, 33)
Manual Tuning
Sets the TV channels manually (p. 32, 33)
Update Channel List
Updates the channel list while keeping your settings (Digital TV mode)
(p. 32)
Signal Condition
Checks the Digital TV signal condition (p. 32)
Add TV Signal
Adds the TV mode
●
This function is available if you skip any modes to tune in [Auto Tuning] for
first using the TV.
●
To operate, refer to the [Auto Tuning] operations for first using the TV
(p. 14).
TH-L32_39EM5Z.indb 28
TH-L32_39EM5Z.indb 28
7/3/2012 6:47:43 PM
7/3/2012 6:47:43 PM
