77
Technical
Problem
Actions
Digital TV
Due to the digital reception technologies involved, quality of the Digital TV signals may be
relatively low in some cases, despite good reception of Analogue TV channels.
Unable to receive signals
with a high-performance
aerial
TV
VCR
(Individual aerial)
(Individual aerial)
Aerial
Input
terminal
Splitter
Aerial Output
Aerial Input
Aerial Output
Install an aerial individually for the TV and VCR
●
(or use a splitter).
Interference or
frozen / disappearing
image in Digital TV
Check “Digital TV Signal Condition” (p. 32).
●
If “Signal Quality” or “Signal Strength” are displayed in
red, check aerial. If problem persists, consult your local
Panasonic dealer.
Turn the TV off with the Mains power On / Off switch, then
●
turn it On again.
Other
TV goes into Standby
mode
Auto power standby function is activated.
●
The TV enters Standby mode about 30 mins. after analogue
●
broadcasting ends.
The remote control does
not work or is intermittent
Are the batteries installed correctly? (p. 3)
●
Has the TV been switched On?
●
Point the remote control directly at the front of the TV (within
●
about 7 m and a 30 degree angle of the front of the TV).
Situate the TV away from sunshine or other sources of
●
bright light not to shine on the TV’s remote control signal
receiver.
FAQs
