52
On screen messages
No Signal
•
Check the connection of the RF cable.
No Service
•
The station stops the services.
No Recording - UNKNOWN REASON
•
The recording cannot be done by any reason. Check the equipment.
•
Disc or tape may be full.
No Recording - Check Tape or Disc
•
The tape or disc may be “write protected”, missing or damaged.
The equipment may already be recording.
No module inserted
•
Check the CI module inserted completely (p. 27).
No DVB Service found
•
No DVB signal can be found in Auto Setup.
New version 1.90 found.
Do you really want to update the
software and reboot the system ?
Press OK to download the new version
Press EXIT to Ignore
•
There is a new software available.
New DVB Service Found!
Press OK start Auto Setup
Press EXIT to Ignore.
Selecting Auto Setup will delete
current Profile and Childlock settings
•
There is a new DVB station.
Max. number of Timers already set !
•
Maximum timer programming event is 8.
Key not available
•
You cannot select the same input source between Main and Sub
screen when you are viewing in multi window. (p. 13)
Invalid system time. Please exit !
•
Cannot get the time information. Check the connection of the RF
cable.
Invalid DVB Channel
•
Invalid DVB channel is selected.
Feature not available
•
Check the Q-Link connection and setting (p. 40).
•
The impossible source (Component / HDMI / PC) to be record.
DOWNLOAD IN PROGRESS PLEASE WAIT
•
Q-Link channel download is in progress.
Bad Signal
•
The signal is weak. Check the aerial.
Are you sure you want to delete this timer ?
Press OK to delete timer
Press Exit to return
•
Make sure the deleting programme event is with your desire.
Are you sure ?
•
Make sure the operation is with your desire.
All tuning data will be erased
•
“Shipping Condition” will erase all tuning data (p. 32).
•
“Auto Setup” will be erased all present DVB and Analogue tuning
datas (p. 30).
Message
Meaning / Action
