52
LSQT1146
Recording
1
Press the joystick. Then move
the joystick down to display the
icon shown in the illustration.
2
Move the joystick up to select
[
].
≥
If it is difficult to focus, adjust the focus
manually. (
l
55)
To cancel the MagicPix function
Select [
] again.
≥
The MagicPix function makes the signal
charging time of CCD up to approximately 30
k
longer than usual, so that dark scenes can be
recorded brightly. For this reason, bright dots
that are usually invisible may be seen, but this
is not a malfunction.
≥
If you turn off the power or operate the mode
dial, the MagicPix function is canceled.
≥
If set in a bright place, the screen may become
whitish for a while.
(SD)
You can record still pictures on an SD card using
the timer.
¬
Rotate the mode dial to select
.
1
Press the joystick. Then move
the joystick down to display the
icon shown in the illustration.
2
Move the joystick left to select
[
Ø
].
3
Press the Photoshot button [
].
After the [
Ø
] display flashes for approx.
10 seconds, a still picture will be recorded.
≥
After recording, the self-timer is canceled.
To stop the timer midway through
Press the MENU button. (The self-timer setting is
canceled.)
≥
If you turn off the power, the self-timer standby
mode is canceled.
≥
Depending on the time taken to bring the
subject into focus, the recording may take
longer than set to start.
(RAM)
(-RW‹VR›)
(-RW‹V›)
(-R)
(SD)
You can check if the image is level while
recording by using the lines displayed on the
screen.
¬
Rotate the mode dial to select
or
.
Self-timer recording
This is for recording shots of yourself
as well.
2/2
2/2 NEXT
NEXT
2/2 NEXT
2/2
2/2 NEXT
NEXT
2/2 NEXT
Recording guideline
function
Checking if the image is level.
1/2
1/2 NEXT
NEXT
1/2 NEXT
1/2
1/2 NEXT
NEXT
1/2 NEXT
LSQT1146.book 52 ページ ２００６年１２月５日 火曜日 午前１０時４０分
