Before using
24
LSQT1146
∫
How to hold a disc or card
Do not touch the recording/playback surface or the
terminal surface.
∫
When inserting/removing a disc
Do not allow the recording/playback side of the disc to get dirty and avoid fingerprints.
≥
If there is a scratch or dirt (e.g. dust or fingerprints) on the recording/playback side of the disc, images
cannot be recorded or played back normally and the following phenomena may occur:
j
Recording or playback becomes impossible.
j
Playback image stops momentarily or sound is interrupted during playback.
j
Block noise appears on playback images.
j
The message “PLEASE CHECK FOR SCRATCHES OR STAINS ON DISC.” appears.
∫
If there is dirt or condensation on the disc
Wipe with a damp cloth and then wipe dry.
∫
Handling precautions
≥
Be careful about scratches and dirt.
≥
Do not attach labels or stickers to discs.
(This may cause disc warping and un-balanced rotation, rendering it unusable.)
≥
Write on the label side of the disc only with a soft, oil-based felt pen. Do not use ballpoint pens or
other hard writing implements.
≥
Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other
solvent.
≥
Do not use scratch-proof protectors or covers.
≥
Do not drop, stack, or impact discs. Do not place objects on them.
≥
Do not use the following discs:
j
Discs with exposed adhesive from removed stickers or labels.
j
Discs that are badly warped or cracked.
j
Irregularly shaped discs, such as heart shapes.
≥
Do not expose the terminals of the card to water, garbage or dust.
≥
Do not place in the following areas:
j
In direct sunlight.
j
In very dusty or humid areas.
j
Near a heater.
j
Locations susceptible to significant difference in temperature (condensation can occur).
j
Where static electricity or electromagnetic waves occur.
≥
Put discs and cards back in their cases for protection when not using them.
Disc and card handling
LSQT1146.book 24 ページ 2006年12月5日 火曜日 午前10時40分