Panasonic VDR-M70EG, Руководство по обслуживанию

Страница: 71 / 169

(10) USB Holder, USB-H/USB Circuit Board, Rear Cover, EVF Unit, and Hand Strap
Note:
Before replacing the EVF unit, always perform “(1) BL DET Check” in “6-4-11 EVF”.
USB Holder (a) and USB-H/USB Circuit Board (b)
1) Remove one screw [F].
2) Disconnect the USB-H/USB circuit board from MAN-H/MAN circuit board (h).
3) Remove the USB-H/USB circuit board from USB holder in the direction of the arrow.
Rear Cover (c) and EVF Unit (d)
4) Remove the hand strap from side case-R (g).
5) Remove one screw [F] and one screw [A].
6) Disconnect the three flat cables, and then remove the rear cover along with the EVF unit.
7) Remove one screw [A], and then remove the EVF unit.
Hand Strap (e)
8) Remove screw [A], screw [D] and screw [M], and then remove the hand strap.
(a) USB holder
(b) USB-H/USB Circuit Board
(c) Rear cover
(d) EVF unit
(f) Hand strap plate
(g) Side case-R
(h) MAN-H/MAN circuit board
Fig. 5-3-13
2) (b)
4)
8) [A]
8) [M]
5) [F]
5) [A]
1) [F]
7) [A]
3)
6)
6)
8) [D]
(e)
(f)
(g)
(a)
(d)
(c)
(h)
[A] M1.7x4 (Black)
[D] M1.7x4 (Black)
[F] M1.6x2.5 (Black)
[M] M1.7x3 (Black)
71
VDR-M70EG / VDR-M70EB / VDR-M70GC / VDR-M50EG / VDR-M50EB / VDR-M50GC
Downloaded From CamcorderManual.com Panasonic Manuals