Panasonic VDR-M70EG, Руководство по обслуживанию

Страница: 59 / 169

4.9.2. EEPROM data backup and write
(1) Application
Perform this work whenever you replace the MAN-H/MAN circuit board on which the EEPROM is
mounted.
Create a backup file of the data in EEPROM to be replaced in a PC, and write the backup file to
new EEPROM: Some adjustment items that are performed after replacement can be omitted.
Refer to “6-3-2 List of Adjustments Needed After Replacing Major Components” for adjustment
items that can be omitted.
(2) Preparations
1) Connect the VDR-M70/M50, jig/tool and power supply as shown in Fig. 4-9-3.
Refer to “6-1-1 List of Jigs and Tools used when Creating Reference Data” and “6-1-2 Power
Supply and Materials for Creating Reference Data” for details on jig/tool and power supply in the
figure.
2) Copy the adjustment program to HDD of PC.
Refer to “6-1-5 Copy or Deleting Adjustment Program” for copying.
3) Start the adjustment program in order to display the adjustment menu screen on PC display.
Prohibition:
Completely assemble the VDR-M70/M50; create backup file of EEPROM data and write it
with only the adjustment cover removed (see Fig. 4-9-3).
Do not attempt to perform work with the VDR-M70/M50 disassembled: Doing so is very
dangerous because the VDR-M70/M50 incorporates high-voltage circuits and a laser emitter
block.
Note:
1) Always connect the Skylark connection jig before connecting the DC power cord to VDR-M70/
M50: Connecting the Skylark connection jig after powering the VDR-M70/M50 could
cause a fault.
2) Connect the Skylark connection jig so that the lead wires from jig face up.
59
VDR-M70EG / VDR-M70EB / VDR-M70GC / VDR-M50EG / VDR-M50EB / VDR-M50GC
Downloaded From CamcorderManual.com Panasonic Manuals