51
LSQT1156
Recording
≥
In the following cases, the tele macro function
is cancelled.
j
The zoom magnification becomes lower than
10
k
.
j
The power is turned off or the mode dial is
operated.
(RAM)
(-RW‹VR›)
(-RW‹V›)
(-R)
This function allows you to record colour subjects
in dark locations to stand out against the
background.
Attach this unit to a tripod, and you can record
images free from vibration.
≥
Minimum required illumination: approx. 1 lx
(VDR-D310)/approx. 2 lx (VDR-D220)
≥
Recorded scene is seen as if frames were
missed.
¬
Rotate the mode dial to select
.
1
Press the joystick. Then move
the joystick down to display the
icon shown in the illustration.
2
Move the joystick up to select
[
].
≥
If it is difficult to focus, adjust the focus
manually. (
l
54)
To cancel the colour night view function
Select [
] again.
≥
The colour night view function makes the
signal charging time of CCD up to
approximately 25
k
longer than usual, so that
dark scenes can be recorded brightly. For this
reason, bright dots that are usually invisible
may be seen, but this is not a malfunction.
≥
If you turn off the power or operate the mode
dial, the colour night view function is cancelled.
≥
If set in a bright place, the screen may become
whitish for a while.
(SD)
You can record still pictures on an SD card using
the timer.
¬
Rotate the mode dial to select
.
1
Press the joystick. Then move
the joystick down to display the
icon shown in the illustration.
2
Move the joystick left to select
[
Ø
].
3
Press the
button.
After the [
Ø
] display flashes for approx.
10 seconds, a still picture will be recorded.
≥
After recording, the self-timer is cancelled.
Colour night view function
This allows recording in dark
locations.
2/2
2/2 NEXT
NEXT
2/2 NEXT
2/2
2/2 NEXT
NEXT
2/2 NEXT
Self-timer recording
This is for recording shots of yourself
as well.
1/2
1/2 NEXT
NEXT
1/2 NEXT
1/2
1/2 NEXT
NEXT
1/2 NEXT
LSQT1156_EN.book 51 ページ ２００６年１２月７日 木曜日 午後７時５３分
