Panasonic UF 885 - Panafax B/W Laser, Руководство по обслуживанию

Страница: 159 / 342

Service Modes
159
Note:
1. [ ] - Factory Default
2. The contents of the Funcion Parameter List may vary depending on the country’s regulations.
3. “*” mark will be shown on the left side of number when setting was changed from default.
Function Parameter List (Sample)
************* -FUNCTION PARAMETER- ************* DATE JAN-12-1999 ***** TIME 12:07 ********
00 MON/TEL DIAL:[Monitor] Monitor 50 RING DET MODE:[Normal] Normal
01 ALARM STATUS:[Timer] Timer 51 ----------
02 STOP COMM.JRNL:[On] On 52 PULSE RATE:[10pps] 10pps
03 CONTINUOUS POLL:[Off] Off 53 ----------
04 NUMERIC ID SET:[On] On 54 ----------
05 --------- 55 BUSY TONE CHECK:[On] On
06 ID DISPLAY:[Chara] Chara 56 ----------
07 JNL COLUMN:[Station] Station 57 ----------
08 MONITOR:[Off] Off 58 COMM. JRNL + IMAGE:[On] On
09 DC LOOP:[Off] Off 59 CONF.RCV REPORT:[On] On
10 TX LEVEL:[-9dBm] -9dBm 60 VERSION: UF-895 ALV02100AU
11 RX LEVEL:[-43dBm] -43dBm 61 TX/RX/PRT/CPY:000050/000058/000074/000016
12 DTMF LEVEL:[-5dBm] -5dBm 62 PRINT COUNTER:[Off] Off
13 G3 RX EQL:[0dB] 0dB 63 ----------
14 G3 TX EQL:[0dB] 0dB 64 ----------
15 --------- 65 ----------
16 --------- 66 ----------
17 TX START:[14400bps ] 14400bps 67 ----------
18 RX START:[14400bps ] 14400bps 68 ----------
19 ITU-T V.34:[On] On 69 ----------
20 ITU-T ECM:[On] On 70 LINE ERROR:[128] 128
21 EP TONE:[Off] Off 71 TOTAL ERROR:[ 10] 10
22 SIG. INTERVAL:[500ms] 500ms 72 CONTI. ERROR:[Off] Off
23 TCF CHECK:[Normal] Normal 73 ERROR DETECT:[Rate] Rate
24 CED FREQ.:[2100Hz] 2100Hz 74 RTN RECEIVE:[Discon] Discon
25 COMM. START-UP:[1'st] 1'st 75 MH/MR/MMR/JBIG:[JBIG] JBIG
26 NON-STANDARD:[On] On 76 ----------
27 SHORT PROTOCOL B:[On] On 77 RX JAM LENGTH:[2 m] 2 m
28 SHORT PROTOCOL D:[On] On 78 ----------
29 REMOTE DIAG.:[On] On 79 ----------
30 CED & 300bps:[75ms] 75ms 80 DOC TOP FEED:[0.0mm] 0.0mm
31 RTC=EQL x 12:[Off] Off 81 DOC END FEED:[0.0mm] 0.0mm
32 V34 TX START:[33600bps] 33600bps 82 JAM LENGTH:[ 2 m] 2 m
33 V34 RX START:[33600bps] 33600bps 83 ----------
34 V34 TX SR:[3429sr] 3429sr 84 LINE AS NOPAPER:[Ring] Ring
35 V34 RX SR:[3429sr] 3429sr 85 ----------
36 --------- 86 REDUCTION FINE:[On] On
37 PROTOCOL DISPLAY:[Off] Off 87 DARKER LEVEL:[4] 4
38 --------- 88 NORMAL LEVEL:[8] 8
39 FLASH TIME:[500] 500ms 89 LIGHTER LEVEL:[12] 12
40 --------- 90 CONTINUE FROM ADF:[On] On
41 PAUSE TIME:[3sec] 3sec 91 ----------
42 --------- 92 SMOOTHING:[On] On
43 REDIAL INTERVAL:[3min] 3min 93 ----------
44 REDIAL COUNT:[5] 5 94 ----------
45 RING DET. COUNT:[2] 2 95 ----------
46 ON-HOOK TIME:[5sec] 5sec 96 ----------
47 RESPONSE WAIT:[55sec] 55sec 97 ----------
48 --------- 98 ----------
49 --------- 99 ----------
Note:The power must be reset for the new parameter settings to take effect.
-PANASONIC -
******************************** -PANAFAX- UF-885 - ******* -12345678901234567890- ***********