Panasonic UF 885 - Panafax B/W Laser, Руководство по обслуживанию

Страница: 186 / 342

Panasonic UF-885 / 895
186
5.9 Service Mode 9 (System Maintenance)
5.9.1 Overview
This Service Mode is used to maintain and/or update the firmware of the machine.
Use the following procedure for System Maintenance.
System Maintenance Table
Step Operation or Unit Condition LCD Display
1 Standby
2 Press “FUNCTION” and then “7”.
3 Press “MONITOR” four times, then press “*”.
4 Press “9”.
5 Press “START” to update the firmware.
Enter No. or press ”
∨
” or “
∧
“ to select the maintenance to be performed.
Ex: Enter “2”.
6 Press “START” and “SET”.
7 After the backup is completed, repeat step 5 through 6
to request an operation.
8 Press “STOP” to return to standby.
No. Maintenance Mode Description
1 FIRMWARE UPDATE Updates the firmware in the machine with the Master Firmware Card.
2 FIRMWARE BACKUP Creates a Backup Card of the machine’s firmware.
(A 2 MB or higher Flash Memory Card is required)
3 PARAMETER RESTORE Restores the parameters from the Backup Card into the machine.
4 PARAMETER BACKUP Creates a Backup Card of the machine’s parameters.
(A 1 MB or higher Flash Memory Card is required)
5 PC
→
FLASH CARD Creates a Master Firmware Card using the Firmware Update Kit.
(A 2 MB or higher Flash Memory Card is required)
8 SEND RECEIVED FILE Transfers documents from memory to another fax machine during a fatal printer
error.
JAN-12-1999 15:00
00%
SET MODE (1-6)
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
SYSTEM MAINT. (1-8)
1:FIRMWARE UPDATE
SYSTEM MAINT. (1-8)
2:FIRMWARE BACKUP
FIRMWARE BACKUP
* IN PROGRESS *
SERVICE MODE
ENTER NO. OR
JAN-12-1999 15:00
00%