Panasonic UF-4500 Скачать руководство пользователя

Страница: 197 / 200

197

Redistribution and use in source and binary forms, with or without modification, are permitted provided that this

notice is preserved.

The names of the copyright holders may not be used to endorse or promote products derived from this

software without their specific prior written permission.

This software is provided ``as is'' without express or

implied warranty.

---

Redistribution and use in source and binary forms are permitted provided that this notice is preserved and that

due credit is given to the University of Michigan at Ann Arbor.

The name of the University may not be used to

endorse or promote products derived from this software without specific prior written permission.

This

software is provided ``as is'' without express or implied warranty.

---------------------------------------------------------------------------

The OpenLDAP Public License

Version 2.8, 17 August 2003

Redistribution and use of this software and associated documentation ("Software"), with or without modification,

are permitted provided that the following conditions are met:

1. Redistributions in source form must retain copyright statements and notices,

2. Redistributions in binary form must reproduce applicable copyright statements and notices, this list of

conditions, and the following disclaimer in the documentation and/or other materials provided with the

distribution, and

3. Redistributions must contain a verbatim copy of this document.

The OpenLDAP Foundation may revise this license from time to time.

Each revision is distinguished by a version number.

You may use this Software under terms of this license

revision or under the terms of any subsequent revision of the license.

Содержание UF-4500









































































































































































































Результаты поиска

Содержание UF-4500

Отзывы:

Похожие инструкции для UF-4500

Бренды по названию

Популярные бренды

Panasonic UF-4500, Руководство по эксплуатации

Результаты поиска

Содержание UF-4500

Отзывы:

Похожие инструкции для UF-4500

Бренды по названию

Популярные бренды