- 47 -
3D Eyewear - Replacing battery
When the battery is running low, the indicator lamp flashes 5 times on turning
the 3D Eyewear on. In this case, early battery replacement is recommended.
●
Dispose of the old batteries as non-burnable rubbish, or in line with the
waste disposal regulations in your local area.
1. Remove the battery cover using pen tip or screwdriver (minus -) etc.
2. Replace the battery (coin-shaped lithium battery CR2025)
●
If difficulty, remove it with the tip of the driver.
●
Note the correct polarity (+ or -).
3. Attach the battery cover
Viewing 3D
You can enjoy viewing 3D images with contents or programmes
corresponding to the 3D effect by wearing the 3D Eyewear.
●
This TV supports Frame Sequential, Side by Side and Top and Bottom 3D
formats.
– Frame Sequential is the 3D format that the images for the left and right
eyes are recorded with the high definition quality and alternately played
back.
●
The 3D Eyewear must be worn to view 3D images. Perform the First
Registration when the 3D Eyewear is used for the first time.
Watching 3D 3D Eyewear - Registration
1. Turn the 3D Eyewear on and put it on
●
Connection status and battery status are displayed on the bottom right
Содержание TX-P42STW60
Страница 1: ...eHELP English TX P42STW60 TX P50STW60 TX P55STW60 TX P65STW60 ...
Страница 188: ...Ver 2 02 ...