T
imer Programming
45
Timer Programming
Timer Programming from Menu
The Timer Programming menu allows you to choose programmes that you wish to remind watching or
record to the external recorder. At the correct time, the TV will tune to the correct channel automatically
to record even if the TV is in Standby mode.
TV Guide may also be used to set timer programming event (p. 22).
•
Timer Programming can store up to 15 events.
•
For recording using Timer Programming, the TV must be either On or in standby. For reminders to be
displayed, the TV must be On.
•
No other channel can be selected while the recording of Timer Programming is in progress.
•
It may not be possible to record an encrypted programme (which is copy-protected).
•
When recording programmes to the external recorder, be sure to make the proper settings on the recorder connected to the TV.
If a compatible recorder with Q-Link or similar technologies is connected to the TV (p. 72) and the [Link
Settings] (p. 34) are correct, no setting of the recorder is required. Also read the manual of the recorder.
•
If the recorder is not compatible with Q-Link or similar technologies, set the timer of the recorder in addition
to the Timer Programming on the TV. For preparations of a recorder, read the manual of the recorder.
•
Recordings to the external recorders are always in standard definition composite video via SCART,
even if the original programme is in high definition.
■
To return to TV
EXIT
■
To unlock the tuner
and stop recording
G
U
ID
E
EXIT
1
Select the tuner you want to use (DVB or Analogue)
TV
2
Display the menu
MENU
3
Select [Timer]
Main Menu
Picture
Sound
Timer
Setup
access
select
4
Select [Timer Programming]
Access
Timer Programming
Off Timer
Auto Standby
Off
Off
access
select
Note
•
Check that the LED is orange. If not, timer programmes are not active or not stored.
•
Timer Programming reminder messages will remain displayed until one of the following occurs:
• You press the OK button to view the programme or the EXIT button to cancel the reminder.
• The timer programming event that the reminder is set for ends.
•
“!” identifies that any timer programming events have overlapped. [Ext Rec.] is given priority over
[Reminder]. As for the overlapped two or more [Ext Rec.], the first timer programming event starts and
finishes as programmed. The next timer programming event can then start.
•
2 minutes before the starting time, a reminder message appears if you are watching TV.
• To remove the message and
start the programme
• To cancel the Timer
Programming
EXIT
•
The recording of Timer Programming will automatically change to the programmed channel 10
seconds before the start time.
•
To stop recording of the timer programming event, it may be necessary to stop the recorder manually.
•
The recording of Timer Programming will be performed even if the TV is in Pause Live TV recording
(p. 75). In this case, these recordings will be cancelled.
