Technical Information
●
FAQs, etc.
67
SD Card
If the SD Card does not meet SD standards,
it may cause the TV to malfunction.
24 mm
32 mm
2.1 mm
Cautions in handling SD Card
■
Do not remove the card while the TV is accessing data (this can damage card or TV).
●
Do not touch the pins on the back of the card.
●
Do not subject the card to a high pressure or impact.
●
Insert the card in the correct direction (otherwise the card or TV may be damaged).
●
Electrical interference, static electricity, or erroneous operation may damage the data or card.
●
Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of
●
the TV. (Panasonic is not liable for any deterioration or damage of recorded data.)
Data format for Card browsing
■
Photo : Still images recorded with digital still cameras compatible with JPEG files of DCF
●
∗
and EXIF standards
Data format - Baseline JPEG (Sub-sampling 4:4:4, 4:2:2 or 4:2:0)
Image resolution - 8 × 8 to 30,719 × 17,279 pixels
Video : SD-Video Standard Ver. 1.2 [MPEG-2 (PS format)] and AVCHD Standard compatible files with an audio
●
format that is either MPEG-1/Layer-2 format or Dolby Digital format
(Files recorded with vertical frequency 50 Hz are applicable. A modified data with a PC may not be
displayed correctly.)
Card format : SDXC Card - exFAT
●
SDHC Card / SD Card - FAT16 or FAT32
Compliant card type (maximum capacity): SDXC Card (64 GB), SDHC Card (32 GB), SD Card (2 GB),
●
miniSD Card (2 GB) (requiring miniSD adapter)
If miniSD Card is used, insert / remove it together with the adapter.
●
Check the latest information on the card type at the following website. (English only)
●
http://panasonic.jp/support/global/cs/tv/
∗
DCF (Design rule for camera file system): Unified standard established by Japan Electronics and Information Technology Industries Association (JEITA).
Note
Format the card with the recording equipment.
●
The picture may not appear correctly on this TV depending on the recording equipment used.
●
Display may take some time when there are many files and folders.
●
This function cannot display Motion JPEG or still images that are not JPEG format (i.e. TIFF, BMP).
●
Data modified with a PC may not be displayed.
●
Images imported from a PC must be compatible with EXIF (Exchangeable Image File) 2.0, 2.1, and 2.2.
●
Partly degraded files might be displayed at a reduced resolution.
●
The folder and file names may be different depending on the digital camera or digital video camera used.
●
Do not use two-byte characters or other special codes.
●
The card may become unusable with this TV if the file or folder names are changed.
●
SCART and HDMI terminal information
AV1
■
SCART terminal
(RGB, VIDEO, Q-Link)
Suitable inputs for AV1 include RGB (Red / Green / Blue).
AV2
■
SCART terminal
(RGB, VIDEO, S-VIDEO, Q-Link)
AV2 - Pins 15 and 20 are dependent on AV2 S-VHS / VIDEO
switching.
Socket Earth
21
CVBS out (video) 19
CVBS earth
17
Red in
15
Red earth
13
Green in
11
Green earth
9
Blue in
7
Blue earth
5
Audio out (L)
3
Audio out (R)
1
20 CVBS in (video)
18 RGB status earth
16 Status RGB
14 Earth
12 --
10 Q-Link data
8 Status CVBS
6 Audio in (L)
4 Audio earth
2 Audio in (R)
Socket Earth
21
CVBS out (video) 19
CVBS earth
17
Red in, S.C. - in
15
Red earth
13
Green in
11
Green earth
9
Blue in
7
Blue earth
5
Audio out (L)
3
Audio out (R)
1
20 CVBS in (video)
18 RGB status earth
16 Status RGB
14 Earth
12 --
10 Q-Link data
8 Status CVBS
6 Audio in (L)
4 Audio earth
2 Audio in (R)
HDMI
■
terminal
Hot Plug Detect
19
DDC/CEC Ground 17
SCL
15
CEC
13
TMDS Clock Shield 11
TMDS Data0
−
9
TMDS Data0+
7
TMDS Data1 Shield 5
TMDS Data2
−
3
TMDS Data2+
1
18 +5V Power
16 SDA
14 Reserved
(in cable but N.C. on device)
12 TMDS Clock
−
10 TMDS Clock+
8 TMDS Data0 Shield
6 TMDS Data1
−
4 TMDS Data1+
2 TMDS Data2 Shield
