Panasonic TX-58DX902B, Руководство пользователя

Страница: 347 / 362

Digital TV
[Some features are not available on all models.]
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
Block noise, frozen or disappearing image occurs / Some channels cannot be
tuned
●
Check the position, direction and connection of the aerial or dish.
●
Check Signal Condition . If the level of Signal Quality is low, the DVB
signal is weak. Connecting the aerial to the TV directly may improve signal
quality than connecting the aerial through the equipment (Set top box,
DVD, etc.).
Watching > Tuning and editing channels > Signal Condition
Watching > Basic > Basic connection
●
Weather conditions affect signal reception (heavy rain, snow, etc.), in
particular in poor reception areas. Even during good weather, the high
pressure can cause poor reception of some channels.
●
Due to the digital reception technologies involved, quality of the digital
signals may be relatively low in some cases, despite good reception of
analogue channels.
●
Turn the TV off with Mains Power On / Off switch, then turn it on again.
Freesat Auto Setup cannot be done completely
●
Check connection and dish alignment. The dish needs to be pointing at
Astra2 at 28.2 degrees east, and Eurobird1 at 28.5 degrees East.
●
If the problem persists, consult your freesat registered retailer or contact
Freesat (UK) Ltd by visiting www.freesat.co.uk
Faulty dish message appears
●
The satellite cable may be short-circuited or there may be connection
problems of the cable. Check the cable and connection and then turn the
TV off with Mains Power On / Off switch, and turn it on again.
●
If the message persists, consult a dish installer for checking the dish and
cable.
- 347 -