Panasonic TX-36PD30, Руководство по эксплуатации

Страница: 28 / 40

28
Q
--
Link allows the television to communicate with a compatible VCR or DVD Recorder.
ForQ
--
Linkcommunicationtowork,theTVmustbeconnectedtoarecordingdevicewiththe“Q
--
Link”,“NEXTVIEWLINK”,“DATA
LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK” logo using a “fully wired” Scart cable between the AV2 socket of the
television and the appropriate socket on your VCR, and the AV4 socket of the television and the appropriate socket on your DVD
Recorder.
For connection to the appropriate Scart socket on the recording device, refer to the device’s operating instruction book.
When using a “NEXTVIEWLINK” device the main features possible are the following :
Preset Download
This allows the programme order from the TV to be downloaded to the recording device,helping toensure thatcorrect recordingsare
made; there are several ways to perform this operation :
1. During installation as explained in the ’Quick Start Guide’ beginning on page 9.
2. When Auto setup is started from within the Tuning menu, see page 19.
3. Preset download started from the recording device, refer to the device’s operating instruction book.
Important Note:
Notallrecordingdevicessupportthistypeofdatacommunicationsystem.Somemaysupportcertainfeatures,butnotothers.Referto
the recording device’s operating instruction book.
If Q
--
Link is inoperative, first confirm that your Scart cable is a “fully wired” type. Ask your dealer for further details.
This will allow the immediate recording of the programme currently shown on the television, by the record-
ing device attached to the Scart socket, which can be chosen using “Q---Link”. (see page 15).
Press the DIRECT TV REC button on the remote control.
If the recording device is in Standby mode with usable recording media inserted, it will automatically
switch on when you press the
DIRECT TV REC button.
What You See Is What You Record (DIRECT TV RECORDING)
If a “Q
--
Link” device is connected, a message will appear on the TV screen showing what is being recorded, or if it is not possible to
record. Some “Q
--
Link” compatible devices will only display the message when on the VCR programme position(0) or in AV mode.
Refer to the device’s operating instruction book.
Recording in progress
The recording device is recording the programme signal
from its own tuner. If you wish you can switch off the TV
and leave the device recording in the normal way.
No recording -- Check tape or disc
The tape or disc may have been “write protected”, missing
or may be damaged. The device may already be recording.
Refer to the device’s operating instruction book.
Additionally, when using a “Q
--
Link” device the main features possible are the following :
The following features are only available from the device connected to the scart socket selected using “Q---Link“. (see page 15).
TV / Recording device Auto Power On
If you insert pre---recorded media into the recording device and press the Play button whilst the TV is in ’Standby’ mode, the TV will
automatically switch on and select the correct AV input so that you can view the content.
Recording device Auto Power Standby
WhentheTVisswitchedinto’Standby’mode,therecordingdevicewillalsoswitchinto’Standby’modeifthereisnomediainserted,or
ifthereismediainsertedandthedeviceisin’Rewind’or’Stop’mode.IfaVCR isrewindingatape,itwillnotswitchinto’Standby’mode
until rewinding has finished.
Recording device Image View On
If the TV is in Standby mode and the recording device sends a menu to be displayed on the TV screen (e.g. Main menu), the TV will
automatically switch On and the menu will be displayed.
Some other devices may support this feature. Refer to the device’s operating instruction book.
This TV will also communicate with other recording device’s that bear the following logos :
D
“DATA LOGIC” (a trademark of Metz Corporation).
D
“Easy Link” (a trademark of Philips Corporation).
D
“Megalogic” (a trademark of Grundig Corporation).
D
“SMARTLINK” (a trademark of Sony Corporation).
Important Note:
These recording devices may support some or all of the above functions. Refer to the device’s operating instruction book.
Notallrecordingdevicessupportthistypeofdatacommunicationsystem.Somemaysupportcertainfeatures,butnotothers.Referto
thedevice’soperatinginstructionbook.Somefeaturesareonlyavailablefromthedeviceconnectedtothescartsocketselectedusing
“Q---Link“. (see page 15).
If Q
--
Link is inoperative, first confirm that your Scart cable is a “fully wired” type. Ask your dealer for further details.
Q
--
LINK