Panasonic TX-36PD30, Руководство по эксплуатации

Страница: 13 / 40

13
Press the
PICTURE menu button
Move to chosen menu option
Adjust chosen option
Press the
TV/AV button at any time to go back to
watching TV.
The Viewing mode menu allows you to select
threedifferentscreensettings --- Dynamic,Normal
and Cinema.
In each Viewing mode setting, Contrast,
Brightness, Tint (in NTSC only), Colour,
SharpnessandColourbalancecanbeadjustedto
suit your particular viewing requirement (for
example, you may require different settings for
viewing sport, films, news etc.)
Viewingmodeoffersyouuptoamaximumofthree
separate settings for each signal source: RF, AV1,
AV2,AV3,AV4(includingRGB)andAV5.Changes
will be stored automatically.
By analysing and processing the incoming
picture, all three modes feature automatic
enhancement.
Increase or decrease the levels of these options
according to your personal preference.
With an NTSC signal source connected to the TV
this menu option is available; the option allows
adjustment of the picture hue to suit your taste.
Allows you to set the overall colour tone of the
picture. Choose from Cool, Normal and Warm.
Automatically reduces unwanted picture noise.
Lets you choose the screen refresh method:
100Hz will give a steady picture for most signal
transmissions;
To avoid line flicker or any picture noise use
100Hz Plus
75/833i can be used for viewing graphics and still
pictures.
WhenPAL60oranNTSCsignalisreceived,theTV
will select Progressive automatically.
Note:
D
WhenviewingaPALsource(other thanPAL
60)with
ScanmodesettoProgressive,the
screen will flicker, this is not a fault.
Picture menu
PICTURE
PICTURE
TV/AV
Contrast
Tint
Colour
Brightness
Sharpness
Colour
balance
P---NR
Scan mode
Viewing mode