English
- 15 -
Switching On/Off
To Switch the TV On
Connect the power cord to a power source such as a
wall socket (220-240V AC, 50 Hz).
To switch on the TV from standby
• Press the
Standby
button,
Pro/-
or a
numeric button on the remote control.
• Press the centre of the joystick on the TV in or push
it up/down.
To switch on the TV from hard standby
• Press the centre of the joystick on the TV in.
To switch the TV into standby
Press the
Standby
button on the remote control, the
TV will switch into standby mode.
To switch the TV into hard standby
Press the centre of the joystick on the TV in and hold it
down for more than 3 seconds, the TV will switch into
hard standby mode.
To switch off the TV
To power down the TV completely, unplug the power
cord from the mains socket.
Note:
When the TV is switched into standby mode, the standby
LED can blink to indicate that features such as Standby
Mode
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.
First Time Installation
When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press
OK
. In the following steps of
the installation guide, set your preferences using the
directional buttons and
OK
button.
After the language selection, you will be asked whether
you want to change accessibility settings. Highlight
Yes
and press
OK
to change. Refer to
System Menu
Content
section for detailed information on available
options.
Set your country preference on the next screen.
Depending on the
Country
selection you may be asked
to set and confirm a PIN at this point. The selected PIN
cannot be 0000. You have to enter it if you are asked
to enter a PIN for any menu operation later.
You can activate
Store Mode
option in the next step.
This option will configure your TV’s settings for store
environment and depending on the TV model being
used, the supported features of it may be displayed
on the side of the screen as an info banner or the pre-
installed video file may be played back. This option
is intended only for store use. It is recommended to
select
Home Mode
for home use. This option will be
available in
Settings>System>More
menu and your
preference for this setting can be changed later. Make
your selection and press
OK
to continue.
The picture mode selection screen will then be
displayed. In order for your TV to consume less
energy and be more environmentally friendly select
Natural
and press
OK
to continue. You can change
your selection later using the
Mode
option in the
Settings>Picture
menu.
Depending on the model of your TV and the country
selection
Privacy Settings
menu may appear at
this point. Using this menu you can set your privacy
privileges. Highlight a feature an
d press
OK
t
o
enable or disable. Read the related explanations
displayed on the screen for each highlighted feature
before making any changes. You can
press the Right
directional button to highlight the text and
use
the
Pro/-
or Up/Down directional
buttons to
scroll up and down to read the entire text. You will
be able to change your preferences at any time
later from the
Settings>System
>Privacy
>Privacy
Settings
menu. If the
Internet Connection
option is
disabled
Network/Internet Settings
screen will be
skipped and not displayed. If you have any questions,
complaints or comments regarding this privacy
policy or its enforcement, please contact by email at
Highlight
Next
and press
OK
button on the remote
control to continue and the
Network/Internet Settings
menu will be displayed. Please refer to
Connectivity
section to configure a network connection. If you want
your TV to consume less power in standby mode, you
can disable the
Networked Standby Mode
option
by setting it as
Off
. After the settings are completed
highlight
Next
and press
OK
button to continue.
On the next screen you need to agree to the terms
and conditions of Freeview Play to make use of the
related services. Scroll the page to read the entire text
using the up/down directional buttons or
Programme
+/-
buttons. Highlight
Yes
and press
OK
on the remote
to confirm and proceed. Highlight
No
and press
OK
to
proceed without confirmation. For further requirements
for Freeview Play services refer to the
Freeview Play
Platform
section.
On next screen you can set broadcast types to be
searched, set your encrypted channel searching
and time zone (depending on the country selection)
preferences. Additionally you can set a broadcast
type as your favourite one. Priority will be given to the
selected broadcast type during the search process
and the channels of it will be listed on the top of the
channel list. When finished, highlight
Next
and press
OK
to continue.
Содержание TX-32MS350B
Страница 40: ......
