6
Before Operating This Set
Battery Installation
The incorrect use of batteries can cause electrolyte leakage which will corrode the Remote Control or cause the
batteries to burst.
Old Batteries
New Batteries
Replace both batteries at the same time.
Don't mix battery types
(alkaline with carbon zinc, etc.)
Don't Recharge.
Do not use rechargeable (Ni-Cd) batteries.
They are different in shape and performance and may fail to ensure correct operation.
Replace the cover, and slide in reverse until the lock
snaps.
3
Two “R6 (AA)” size
Batteries: Use two “R6 (AA)”size batteries.
Insert the batteries ensuring correct polarity.
This is identifiable by the “+” and “
−
” symbols on both the batteries
and inside the battery compartment.
2
Open the cover.
Apply slight downward pressure while pulling towards the bottom.
1
Battery cautions
