Panasonic TX-26LX500F, Руководство по эксплуатации

Страница: 22 / 44

22
PC mode
Setup menu
During PC mode
Press the MENU button.
Move to choose Setup menu .
Access Setup menu .
Move to choose menu option.
Adjust chosen option or access chosen menu.
Press the EXIT button at any time to exit Setup menu.
MENU
EXIT
Main menu
P i c t u r e menu
Setup menu
Sound menu
PC setup Access to adjust chosen option.
Input :
resolution Displayed during VGA, WVGA, XGA, WXGA input signals.
Select WVGA or WXGA during WVGA or WXGA input signal to avoid noise.
Note:
WVGA and WXGA signals may not be displayed properly.
Clock : If a periodic striped pattern (noise) occurs, carry out adjustments to reduce the noise to the
lowest level.
H-pos : Adjust the horizontal position.
V-pos : Adjust the vertical position.
Clock phase : Eliminate the fl ickering and distortion.
Carry out this adjustment after adjusting Clock.
Adjust to reduce noise to the most inconspicuous level.
Sync : H & V - To synchronize by the horizontal and vertical signals from your PC.
On G - To synchronize by the green signal form your PC (if available).
Volume correction, OSD language
About settings, see page 11.
H-freq. / V-freq.
If the input signal is not applicable, the characters will turn to red.
For applicable PC signals information see page 41.
Clock
Input resolution
H-pos
V-pos
Clock phase
Sync
H & V
VGA
PC setup
PC setup
OSD language
Setup menu
Access
Volume correction