Panasonic TX-26LX500F Скачать руководство пользователя страница 29

Страница: 29 / 44

Card operations

Setup

Press the

button.

Move to choose

Setup

Access

Setup

Move to choose menu option.

Adjust chosen option or access chosen menu.

SD card

MPEG4 view

Photo view

Setup

Memory left

Rec mode
Rec time

Setup

Economy
No setting
Access

Card format

Rec mode

(

Extra

ne, Super

ne, Fine, Normal

Economy

)

The quality of picture can be changed.
The recordable time will be changed by Rec mode.

Notes:

• Multi Media Cards do not support the Extra

ne and Super

ne recording mode. If the recording is started in

these status, recording will automatically be performed in the Fine mode.

• The quality of audio is not changed.

Rec time

(

No setting, 5min, 10min, 15min, 30min, 60min, 90min, 120min

180min

)

Set the recording time before recording.

Note:

If you set Rec time to No setting, the recording does not stop until the card is fully recorded.

Card format

You can format the card.

Notes:

• If the card is formated, all data is erased.
• Only cards that are supported by the SD card slot can be formatted.
• Do not remove the SD card while formatting. That may cause the card to not be able to record properly.

Memory left

You can con

rm the remaining time for recording in each Rec mode.

Press the

button.

Move to choose

Memory left

Access

Memory left

The recordable time informations are displayed by each Rec
mode.

Note:

Since Multi Media Cards do not support the Extra

ne and Super

ne recording

mode, “----” appears.

SD card

MPEG4 view

Photo view

Setup

Memory left

12MB

Recordable time
Economy

15min

Normal

5min

Fine

3min

Super

fine

1min

Extra fine

Less than 1min

Memory left

(Time is approximate)

Содержание TX-26LX500F













































Результаты поиска

Содержание TX-26LX500F

Отзывы:

Похожие инструкции для TX-26LX500F

Бренды по названию

Популярные бренды

Panasonic TX-26LX500F, Руководство по эксплуатации

Результаты поиска

Содержание TX-26LX500F

Отзывы:

Похожие инструкции для TX-26LX500F

Бренды по названию

Популярные бренды