Panasonic TX-24MS480E, Руководство по эксплуатации

Страница: 13 / 751

English - 12 -
which this information can also be viewed, in case
internet access is not available.
9. Google Services
Select each to learn more about each service, such as
how to turn it on or off later. Data will be used accord-
ing to Google’s Privacy Policy. Highlight Accept and
press OK to confirm your selection of these Google
services settings.
Use location
You can allow or disallow Google and third party apps
to use your TV’s location information. Highlight Use
location and press OK to view detailed information
and turn this feature on or off. You can change this
setting later using the Location status option in the
Settings>Device Preferences>Location menu.
Help improve Android
Automatically send diagnostic information to Google,
like crash reports and usage data from your device
and apps. Highlight Help improve Android and
press OK to view detailed information and turn this
feature on or off. You can change this setting later
using the
Settings>Device Preferences>Usage &
Diagnostics menu.
Services and your privacy
Google Assistant sends services you talk to a unique
code. That way, services can remember things like
your preferences during conversations. You can view,
manage and reset the data sent to services on each
service’s page in the Explore section of the Assistant
mobile app. Learn more at g.co/assistant/idreset.
10. Google Assistant
If you have signed in to your Google account in the
previous steps, you can also allow sharing your
requests with your TV’s apps and turn on personal
results for Assistant by choosing the related options
when prompted. Press OK consecutively to proceed.
Information on Google services and some features of
your TV will be displayed next.
11. Password
Depending on the country selection you made in the
earlier steps, you may be asked to define a 4-digit
password (PIN) at this point. Press
OK
to proceed.
The selected PIN cannot be ‘0000’. This PIN will be
required in order to access some menus, content or
to release locked channels, sources, etc. You will have
to enter it if you are asked to enter a PIN for any menu
operation later.
12. Select TV Mode
In the following step of the initial setup, you can set
the TV’s operation mode either as Home or as Store .
The Store option will configure your TV’s settings for
store environment. This option is intended only for store
use. It is recommended to select
Home
for home use.
13. Chromecast built-in always available
Select your chromecast availability preference. If set as
On your TV will be detected as a Google Cast device
and allow Google Assistant and other services to wake
your TV up to respond to Cast commands, even when
on standby mode and the screen is off.
14. Tuner Mode
The next step is the selection of the tuner mode.
Select your tuner preference to install channels for
Live TV function. Aerial , Cable , and Satellite options
are available. Highlight the option that corresponds to
your environment and press OK or Right directional
button to proceed. If you don’t want to perform a tuner
scan highlight Next and press OK .
When the channel scan with the selected tuner is
completed, the installation wizard will bring you back
to this step. In case you want to continue scanning
channels with another tuner, you can proceed as
explained below. If you don’t want to continue and finish
the setup highlight Next and press OK .
Aerial
If the
Aerial
option is selected, you can choose to
search for digital terrestrial and analogue broadcasts.
On the next screen highlight the option you prefer and
press OK to start the search or select Skip Scan to
continue without performing a search.
Note: If the country selected does not have analogue
broadcasts, analogue channels may not be searched.
Cable
If the
Cable option is selected, you can choose to
search for digital cable and analogue broadcasts. If
any, available operator options will be listed on the
Select Operator screen. Otherwise this step will be
skipped. You can select only one operator from the
list. Highlight the desired operator and press OK or
the Right directional button to proceed. On the next
screen highlight the option you prefer and press OK
to start the search or select Skip Scan to continue
without performing a search. If one of the digital
channel search options is selected a configuration
screen will be displayed next. Scan Mode , Frequency
(KHz) , Modulation , Symbol Rate (Ksym/s) , Network
ID options may need to be set. To perform a full scan
set the Scan Mode as Advanced , Quick or Full if
available. Depending on the selected operator and/
or Scan Mode some options may not be available
to be set.
Note:
If the country selected does not have analogue
broadcasts, analogue channels may not be searched.
Once you are done with setting available options,
press the Right directional button to proceed. The TV
will start to search available broadcasts.
Satellite