Panasonic TX-22LT2F, Руководство по эксплуатации

Страница: 10 / 44

10
Quick start Guide
5. TV to VCR download
If a Q-Link, NEXTVIEWLINK or compatible VCR has been connected to the AV2
socket before starting Step 1, programme information will be downloaded to the
VCR.
Downloaded tuning data will match the television’s.
Not all VCRs support this download of programme information, some may require
to be started manually. Refer to the VCR operating instruction book.
If a VCR other than those described above has been connected, then there will
be no download operation.
Notes:
If the VCR has not accepted download data from the TV, you may need to select the Download option from the
VCR’s menu system.
Refer to the VCR operating instruction book.
If Q-Link is not operating correctly, check the following:
• The Scart cable is connected to the TV’s AV2 Scart socket.
• The Scart cable is connected to the VCR’s compatible (Q-Link, NEXTVIEWLINK or similar technology) Scart
socket.
• The Scart cable is a “fully wired” type.
For further information on Q-Link and connecting equipment, see pages 6, 7, 8, 10 ,11 and 38.
• The sorted programme order depends upon the TV signal, the broadcasting system, and reception conditions.
If the order is not to your preference it can be rearranged. Refer to the Programme edit menu - see page 18 for
details.
TV
−
> VCR DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
This is a Q-Link TV. Q-Link, NEXTVIEWLINK and similar technology provide a way for a TV and VCR to communicate,
making it easier to record programmes. In order to be able to exchange information both the TV and the VCR must be
fitted with this technology, and must be connected with a SCARTlead (full function type) between the AV2 socket of the
TV and the appropriate socket on the VCR (see the VCR instruction book for details).
Q-Link lets your TV instruct a compatible VCR to record the programme currently shown on screen, no matter what
programme position is set on the VCR, In order to make use of Q-Link, ensure that the Q-Link option is set to On in the
SET UP menu (see page 16).
Press the
DIRECT
TV REC button.
Notes:
• If the VCR is in Stand-by mode, it will automatically switch on when you
press the
DIRECT
TV REC button.
• To ensure correct recordings are made, the television and VCR should
share tuning information (see page 21).
• Whenever the Auto setup function is used, tuning data will be downloaded
to the VCR (see page 22).
6. Q-Link
F.P. INDEX HOLD
PICTURE
SOUND
SET UP
TV/TEXT
TV/AV
1 2 3
DIRECT
TV REC