Operating Instructions
TU-HDT206A
2
Welcome
We hope you have many years of enjoyment from your new Panasonic HD Digital Receiver.
The following instructions will enable you to quickly set up and install the equipment and begin
receiving the terrestrial digital TV services in your reception area.
The availability of digital TV services in your area is dependent upon the digital signals available
from your local broadcasters and the condition of your aerial system.
This Digital Receiver is intended for the reception of Digital TV picture and sound
signals.
If the Digital Receiver is exposed to drastic temperature changes this can cause liquid
condensation. Allow the condensation to evaporate before plugging in the Digital Receiver to
the power supply.
Do not place the Digital Receiver in the immediate vicinity of a heat source or in direct
sunlight as this will prevent appropriate cooling.
To prevent fire, never place any type of candle or naked flame on top of or near the Digital
Receiver.
Warnings and precautions
Only install the receiver in a safe location (away from any wet environment).
Only plug the receiver into an AC 220V to 240V power supply.
Do ensure the AC plug is fully inserted into the socket.
Do not touch the AC cord or plug with wet hands.
Unplug the receiver immediately if smoke or a strange smell is emitted from the receiver.
・
Do not attempt to repair the receiver by yourself; have the receiver repaired at your local
Panasonic repair agent.
Unplug the receiver if any foreign substance or water enters the unit, or if the unit is damaged
and the covers are broken open.
Keep liquids and other foreign objects away from the receiver.
・
Do not place containers with water (flower vase, cups, cosmetics etc) or small metallic
objects on the receiver.
Do not insert or allow to fall into the receiver any foreign objects (fire or shock may result).
In the event of a thunder storm or lightning, do not touch the receiver or the cables.
Do not plug in the receiver to the AC supply if the AC power cord or power plug is damaged.
Do not pull on the AC lead; hold the AC plug to remove it from the AC socket.
When you move the receiver, be sure to unplug from the AC socket.
Do not cover or obstruct the ventilation slots of the receiver.
・
Install the receiver in a location that allows ventilation of heat from it.
Do not put heavy objects on the top of the receiver.
When you clean this unit, be sure to unplug the power cord from the AC outlet for safety.
Wipe the AC plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or
electric shock.)
Handle the remote control and it’s batteries as below:
1. Use only the specified type of batteries, and do not mix battery types (such as alkaline or
manganese).
2. Do not mix old and new batteries.
3. Do not use rechargeable batteries.
4. Avoid contact with liquids or moisture.
5. Remove the batteries if not using the remote control for a long period of time.
6. Do not allow the + and - terminals of the batteries to come into contact with metallic objects.
7. Do not short-circuit, heat or disassemble the batteries, or dispose of them into liquids or
fires.
