Holster
Handling and maintenance
•
The holster is designed for carrying the specified unit; it is not designed to protect the unit from drops,
shock, vibration, water, etc.
•
Wrap the belt around the waist.
•
Do not leave the holster in areas with high temperatures, such as near a fire or heater, in areas exposed
to direct sunlight, such as inside a vehicle, or in areas with high humidity, such as bathing areas.
•
Store the holster in a cool, dry place with sufficient air circulation, free from dust and chemicals.
•
Keep the belt out of reach of children.
•
For typical cleaning, wipe the holster with a soft, dry cloth.
–
If the holster becomes dirty, wet a soft cloth with water and wring it thoroughly before wiping the
holster.
–
Do not clean the holster with benzene, thinner, alcohol, household cleansers, etc., as these may harm
the holster.
•
If the holster becomes wet from cleaning or from typical use, dry it with a dry cloth and allow it to air dry.
Attaching
1.
Open the snaps (
A
) on rear of the holster and lift up the rear flap (
B
).
2.
Rest the included belt against the rear of the holster as shown in the illustration on the left.
3.
Lower the rear flap and close the snaps.
•
Make sure the belt and the back of the holster (
C
) are fastened to each other.
4.
Attach the included belt to the wearer and adjust the belt length so that it fits snugly.
•
A pen holder (
D
) is also attached.
5.
Insert the unit as shown in the right illustration above, and close the front flap (
E
).
•
You can store a spare battery in the pocket (
F
).
•
Firmly fasten the front flap and pocket.
•
You can also fold back the front flap twice at the seam lines (the dotted lines in the upper-right
illustration) and insert it into the storage area (
G
).
44
Operating Instructions - Reference Manual
Supplementary items
