background image

9

T h e   C D - R O M   d r i v e
vibrates a lot

Cannot read/write to a
floppy disk

Unable to write to a floppy
disk

 

How to format a floppy

disk is unclear

Unable to read/write to the
hard disk

When the previous item is
not the cause

Trouble has occurred with
the CD

When the previous item is
not the cause

The access lamp (

) does

not light

Cannot play CD or read
data from it

 

Cannot eject CD

 Disk Operations

Has the floppy disk been correctly inserted?
Has the floppy disk been correctly formatted?
Has the Setup Utility been used to set [Floppy Operation] to [Enable]?

    (

 

 "Setup Utility")

Your floppy disk content may be corrupted.

Is the floppy disk write-protected?

Select [Format] in [My Computer] - [3 1/2 Floppy (A:)]  - [File].  After confirming the disk
volume and format type, start formatting.

Your drive or file may not have been properly set.
Check to see if the hard disk is full.  If it is full, delete unnecessary files.
Your hard disk content may be corrupted.  Contact Panasonic Technical Support.

Try testing another drive or media.

You may need to clean the lens or CD.

Try testing another driver or media.

Is the CD loaded on the tray correctly?

Is the CD bent, scratched, or dirty?

Is the computer powered on?

To remove a CD when the computer is powered off, insert a sharp object such as the bent-

out tip of a paper clip into the emergency hole.  Pushing it completely to the end will free the

tray so that it can be pulled out.

Is the CD bent labeled?

Emergency
Hole

Содержание Toughbook CF-47 Series

















Отзывы: