EN31
M
aint
enanc
e and
replac
ement
Engli
sh
If the above message is displayed...
Automatic electrode cleaning is performed to
remove calcium deposited on the electrode plate
Wait for a while.
Do not remove the power plug.
Water coming out of the main spout and drain hose during automatic electrode
cleaning cannot be used. (The water has been used during cleaning.)
The electrode plate is located in the electrolyzer inside the main unit. Removing
the calcium prevents deterioration of electrolysis capability.
Start timing of automatic electrode cleaning
After every 10 times
or approx. 10 liters
use of alkaline ion
water and weak acidic
water combined
After every
use of weak
acidic water
When the Alkaline Ionizer has not been
used for 24 hours
When the faucet
is turned off
When water is fl owed after
selecting alkaline ion water or
purifi ed water...
Automatic Electrode Cleaning
(about 50 seconds)
The countdown is displayed.
Automatic Electrode Cleaning
(about 10 seconds)
The countdown is displayed.
Water come
out from the
drain hose
From main
spout and
drain hose
Buzzer beeps
from the start
(about 3
seconds)
Do not run water until the cleaning is completed.
After the cleaning is completed,
blinks,
and the water quality signal changes to blue or green.
When a buzzer beeps, you can use the product.
Do not stop water fl ow until the cleaning is completed. If the water fl ow
is stopped, the same operation repeats next time water is fl owed.
Automatic Electrode Cleaning
Even if
disappears, water may come out from the drain hose.
Water may drip from the main spout. It is not a malfunction. (This is water remaining in the outlet pipe.)
The automatic electrode cleaning is not performed for 10 minutes after alkaline ion water level 1 to 3 is used.
TK-AS700_En.indb 31
TK-AS700_En.indb 31
2022/04/14 18:18:01
2022/04/14 18:18:01