EN11
Selection button
Selects a water quality
level or item.
“Menu/Enter” button
Moves to the menu screen.
(P. EN32)
Determines the selected
content.
Displayed in “pH
adjustment” mode.
Water Signal Indicator
blinks during preparation,
and the display changes as shown below.
Start of preparation :
End of preparation :
Water is fl owing
:
The color changes according to the type
of selected water.
Alkaline 4 : Orange
Alkaline 1~3 : Blue
Purifi ed : Geen
Weak Acidic : Pink
Acidic : Red
“pH adjustment” button
Moves to the pH adjustment
setting screen.
(P. EN23)
Water Quality
Indicator Lights
The water quality indicator of
the selected water lights up.
(Blinks during preparation.)
(P. EN26)
For alkaline ion water
The indicators, numbers, and other displays in the illustrations
are examples for explanation purposes.
Water quality mode
Displays the currently selected water quality mode.
(P. EN24)
Main screen
Display (LCD display)
Water Quality
Selector Buttons
Selects the water quality.
Hydrogen concentration (guideline)
*
Displays a guideline of
hydrogen concentration only
for alkaline ion water.
* This is an estimate calculated
from electrolysis conditions.
pH (guideline)
Displays pH (guideline).(P. EN24)
Displays the
remaining amount
of water fl ow
until cartridge
replacement.
(P. EN29)
Displays an error
of the main unit.
The cause and
solution are
displayed.
Depending on the tap water or usage conditions, the
hydrogen concentration display may not change even if
the type of water or mode is switched.
Around pH 9.5 is recommended for daily drinking.
The LCD display lights up when a button operation is performed or water is fl owed.
(It turns off when the button operation is fi nished or water fl ow is stopped.)
Control panel
Co
nfi
r
m
at
io
n
Engli
sh
TK-AS700_En.indb 11
TK-AS700_En.indb 11
2022/04/14 18:17:39
2022/04/14 18:17:39
