Basic Connection
9
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any
leads.
When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet
first.
Rear of the TV
Mains Lead
Mains lead (supplied)
Aerial
RF cable
•
To remove from the TV:
Push until both
side tabs click
Make sure that
the mains lead is
securely fixed.
tabs
Press both tabs and pull on mains
connector to release
AC 220-240 V,
50 / 60 Hz
Fully wired HDMI
compliant cable
Set top box
Satellite dish
Note
•
Keep RF (antenna) cable away from the mains lead to avoid and minimise mains interference pickup.
•
Do not place the RF cable under the TV.
•
To obtain optimum quality picture and sound, an aerial, the correct cable (75
Ω
coaxial), and the
correct terminating plug are required.
•
If a communal aerial system is used, you may require the correct connection cable and plug between
the wall aerial socket and the TV.
•
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial
system for your particular area and the accessories required.
•
Any matters regarding aerial installation, upgrading of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the Customer.
•
VIERA Link connection
(p. 54)
•
Other equipment connection
(p. 59 - 61, 71)
•
Read the manual of the equipment, too.
