27
PJLink™ Protocol
The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your
computer using PJLink™ protocol.
• Display setup
• Display status query
Supported commands
Commands to control the unit with PJLink™ protocol are shown in the table below.
PJLink™ security authentication
When using PJLink with security authorization, either of the password set for administrator privileges and the
password set for user privileges with Web browser control can be used as the password for PJLink (See page 19).
When using PJLink without security authorization, set use without the password for administrator privileges and the
password for user privileges of Web browser control.
• PJLink™ is a pending trademark in Japan, the United States, and other countries or areas.
Command
Control
Remark
POWR
Power control
Parameter
0 = Standby 1 = Power “On”
POWR?
Power status query
Parameter
0 = Standby 1 = Power “On”
INPT
Input switch
Parameter
See the parameter for command INST?
INPT?
Input switch query
AVMT
Shutter control
Parameter
10 = Picture On (picture mute deactivated), 11 = Picture Off (picture on
mute)
20 = Audio On (audio mute deactivated), 21 = Audio Off (audio on mute)
30 = Shutter mode Off (picture and audio mute deactivated)
31 = Shutter mode On (picture and audio on mute)
AVMT?
Shutter control query
Parameter
11 = Picture Off (picture on mute)
21 = Audio Off (audio on mute)
30 = Shutter mode Off (picture and audio mute deactivated)
31 = Shutter mode On (picture and audio on mute)
ERST?
Error status query
Parameter
First byte: Means fan error. 0 or 2.
Second byte: 0
Third byte: 0
Fourth byte: 0
Fifth byte: 0
Sixth byte: Means other error. 0 or 2.
Meaning of the 0 – 2 settings:
0 = Error is not detected, 2 = Error
LAMP?
Lamp status query
Not supported
INST?
Input switch list query
Parameter
Numbers 11 to 13 are depending on the slot installation condition
11: PC IN input (PC)
When a single input terminal board
is attached
11: SLOT input (SLOT INPUT)
12: PC IN input (PC)
21: VIDEO input (VIDEO)
31: HDMI input (HDMI)
51: Network input (NETWORK)
When a dual input terminal board
is attached
11: SLOT input (SLOT INPUT A)
12: SLOT input (SLOT INPUT B)
13: PC IN input (PC)
22: COMPONENT/RGB IN input
(COMPONENT)
32: DVI-D IN input (DVI)
NAME?
Display name query
The name set for [Name Change] in [Network Setup] is returned.
INF1?
Manufacturer name query Returns “Panasonic”
INF2?
Model name query
Returns “TH-85PB1” (for 85-inch model)
INFO?
Other information query
Returns version number
CLSS?
Class information query
Returns “1”
