14
Network Setup
Press
▼
to go to the next item.
4
In addition, further perform the following setting depending on [Authentication] and [Encryption] settings.
********
********
********
Key 2
Key 3
Key 4
Key 1
1
Default Key
********
When setting [Open] or [Shared] as authentication and setting [WEP] as the encryption
●
method:
Default Key
: Set 1 – 4 numerals for the default key.
Key1 – 4
: Set a WEP key to the key number selected with [Default Key].
Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input
fi
ve
alphanumerics (or a 10-digit string for the hexadecimal format) for the 128-bit key, input
13 alphanumerics (or a 26-digit string for the hexadecimal format).
When using [WPA-PSK] or [WPA2-PSK] :
●
Set a key.
Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.
When the authentication method is [WPA-EAP/WPA2-EAP], [WPA-EAP], [WPA2-EAP]:
●
Set [EAP], [User name], and [Password].
EAP:
Select the EAP setup in the RADIUS server. Types of EAP that can be selected are as
follows.
PEAP (MS-CHAPv2), PEAP (GTC), EAP-TTLS (MD5),
EAP-TTLS (MS-CHAPv2), EAP-FAST(MS-CHAPv2), EAP-FAST(GTC), EAP-TLS
¼
User name:
Input a user name used for authentication (excluding spaces)(maximum 64 characters).
Password:
Input a password used for authentication (maximum 64 characters).
Entering characters
page 15
: When [EAP-TLS] is selected as EAP, it is required to setup “USER NAME”, “PASSWORD”, “DIGITAL
¼
CERTIFICATE”, and “CA CERTIFICATE” with the WEB browser. (See page 24 – 25)
If you are unable to connect to the wireless LAN through the access point, contact the manufacturer of
•
the access point.
When using EAP, the display needs to be set according to the setting of the RADIUS server. Check with
•
the network administrator for the setting of the RADIUS server.
When using an EAP together with an access point with invalid SSID broadcast, select WAP-EAP or
•
WAP2-EAP for the authentication method even if the authentication method of the access point is WPA-
EAP/WPA2-EAP.
Select [Save] and press
5
button.
Save the current network settings.
Default settings of [USER1] - [USER3]
■
The following settings as [USER1] - [USER3] in the [Wireless LAN] are set before the Display leaves the
factory.
SSID
Panasonic Display
Mode AD
HOC
DHCP
Off
Authentication
Open
IP address
192.168.11.100
Encryption
None
Subnet mask
255.255.255.0
Channel
11
Gateway
192.168.11.1
