Panasonic TH-58PX600U, Руководство по обслуживанию

Страница: 11 / 185

6.6. Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Disconnect the couplers (P2, P5, P9, P10, P11, P12, P23
and P25).
2. Remove the screws (×6 ) and remove the P-Board unit.
3. Remove the screws (×21 ) on the back side.
4. Disconnect the couplers (CN01-CN08, CN02-CN06 and
CN03-CN04).
5. Remove the screws (×10 ).
6. Remove the molding props (×9 ).
7. Remove the P(P-1)-Board.
8. Remove the molding props (×5
).
9. Remove the P(P-2)-Board.
Note:
When assembling the P(P-1)-Board and the P(P-2)- Board,
the position of each hole of the insulation sheets(A, B, C, D)
is set to the position of each hole of the P(P-1)-Board and
the P(P-2)-Board and then assemble them. (
marks
indicate setting positions.)
11
TH-58PX600U