manualshive.com logo in svg

Panasonic TH-55VF1HU, Информация по эксплуатации

Поделиться
Скачать
Panasonic TH-55VF1HU Скачать руководство пользователя страница 64

English

64

Remote control operation while the menu is deleted

Selecting colour

Adjusting red, 

green and blue

Displayed for 5 seconds if remote control operation is 

performed.

2048

0
0

Select colour

Red

[Select colour]

Select the colour to correct with    .

Adjusting red, green and blue

Adjust with numeric buttons (<1> to <9>).

Red

<1> ‒

<2> Press and hold to reset to default.
<3> +

Green

<4> ‒

<5> Press and hold to reset to default.
<6> +

Blue

<7> ‒

<8> Press and hold to reset to default.
<9> +

● 

Pressing and holding <1><4><7> and <3><6><9> will 

increase or decrease the value in succession.

● 

Pressing <2><5><8> briefly will show the current 

value.

Note

● 

While the menu is deleted, this setting cannot be 

operated with the buttons on the unit.

Screensaver  

(For preventing image retention)

Do not display a still picture, especially in 4:3 mode, for 

any length of time.
If the display must remain on, a Screensaver should be 

used.

Screensaver

Start

10:00

Mode

Off

FRIDAY

2016/01/01

 

■

Screensaver settings

Screensaver operation

When the Screensaver is operating, the following 5 

patterns are displayed full screen for 5 seconds each, 

and it will be repeated.

Black → Dark grey → Grey → Light grey → White → 

Light grey → Grey → Dark grey

To start Screensaver now

 Select [On] in [Mode].
 Select [Start] and press <ENTER>.

● 

The menu screen will disappear and the 

Screensaver will be activated.

Screensaver

Start

10:00

Mode

On

FRIDAY

2016/01/01

Note

● 

If the following buttons are pressed while the screen 

saver is operating, the screen saver is cancelled.
Remote control: <RETURN>
Main unit:  <MENU (Unit)> <INPUT> <+ (Unit)>  

<- (Unit)>     <ENTER (Unit)>

● 

When the display is turned off, the Screensaver will 

be deactivated.

To set interval of Screensaver

 Select [Interval] in [Mode].
 Set [Periodic time].

● 

Press     to change the time by 15 minutes.

● 

In [ENGLISH(US)] OSD language, [Periodic time] 

is displayed as [SHOW DURATION].

 Set [Operating time].

● 

Press     once to change the time by 1 minute. 

Keep pressing down to change the time by 15 

minutes.

● 

In [ENGLISH(US)] OSD language, [Operating 

time] is displayed as [SAVER DURATION].

Содержание TH-55VF1HU


























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды