Panasonic TH-55VF1HU Скачать руководство пользователя страница 60

Страница: 60 / 121

English

■

[Input change mode]: [Quick]

Promptly switches to the backup input if an

interruption of video occurs, and enables switching

between digital (HDMI / DIGITAL LINK / DVI-D1 /

DVI-D2) inputs.

Note

●

The backup video signal needs to be in the same

format as the (main) input in use for viewing.

●

Upon switching to the backup input, the video and

audio adjustment values for the (main) input used for

viewing will be inherited.

●

This function will start operating once a video signal is

detected by both the input in use for viewing and the

backup input and the [Backup input change] item is

displayed as [Active].

●

This function may not operate correctly depending on

the image playback device.

[Primary backup input]

Sets the first priority backup input.

(None) / [HDMI] / [DIGITAL LINK] / [DVI-D1] /

[DVI-D2]

The input that is of the same type as the one in use

for viewing will be greyed out.

[Secondary backup input]

Sets the second priority backup input.

(None) / [HDMI] / [DIGITAL LINK] / [DVI-D1] /

[DVI-D2]

The input that is of the same type as the one in use

for viewing will be greyed out.

[Auto switch back mode]

Sets whether or not to automatically return to the

former (main) input when the former input video

initially viewed is restored while viewing the video

of the backup input enabled by the operation of the

Backup Input function. (Failback)

[Disable]:

Unreturned

[Enable]:

Returned

[Changing mode]

Select speed of input switching.

[High speed]:

If switching between the same signal formats, it is

possible to switch within 1 second.
If switching between the different signal formats,

picture noise may be caused.

[Normal speed]:

If switching between the same signal formats, it is

possible to switch within 2 seconds.
If switching between the different signal formats, it

takes 3 to 4 seconds to switch but picture noise is

not caused.

[Backup input change]

Displays whether or not operating conditions for the

Backup Input function are met.

[Inactive]:

Indicates that the conditions are not met, and

inactivates the Backup Input function.

[Active]:

Indicates that the conditions are met, and activates

the Backup Input function.

[Main input]

Displays the (main) input initially used for viewing.

[Current input]

Displays whether the input currently in use for viewing

is the (main) input initially used for viewing or the

backup one.

Содержание TH-55VF1HU


























































































































Результаты поиска

Содержание TH-55VF1HU

Отзывы:

Бренды по названию

Популярные бренды

Panasonic TH-55VF1HU, Информация по эксплуатации

Результаты поиска

Содержание TH-55VF1HU

Отзывы:

Бренды по названию

Популярные бренды