18
Daisy-chain Connection
' ' & !
NOTES:
Use the RS-232C cross cable to connect the computer to this Display.
The computer shown is for example purposes only.
A DVI cable and IR cable are attached.
When using daisy chain, set the “
TILING
” menu option in the OSD “
CONFIGURATION2 menu
”. (see page 27)
Up to 10 displays can be connected with a daisy chain, but the number of the connected displays may be limited by a cable
signal or equipment to use.
HDCP can be supported for up to 8 displays for a daisy chain.
([XX??# "
Display No.1
Display No.3
Display No.2
[RS-232C]
K<?# "
Display No.1
Display No.3
Display No.2
[DVI]
, <(?' "
With the optional “Remote Control Kit” (TY-RM50VW), you can specify the Display ID for daisy-chain connection.
External
IR Receiver
Display No.2
Display No.1
Use the “connector cable of remote control”
supplied with TH-55LFV5 series
to connect next display.
