19
Using Network Function
This display has a network function to control the network connected display with your computer.
NOTE:
To use the network function, set each {
LAN SETTING
} setting and make sure to set the {
SERIAL CONTROL
} to {
LAN
}. (see
page 20, 29)
Network Connection
Display (main unit, rear)
Hub or broadband router
LAN cable (Shielded)
Use the shielded Twist Pair (STP)
LAN cable.
NOTES:
Make sure your broadband router or hub supports 10BASE-T/100BASE-TX.
To connect a device using 100BASE-TX, use “Category 5 or above” LAN cable (not included).
Touching the LAN terminal with a statically charged hand (body) may cause damage due to its discharge.
Do not touch the LAN terminal or a metal part of the LAN cable.
For instructions on how to connect, consult your network administrator.
