59
Operating peripheral equipment
Programming the remote control code
You can operate other manufacturers’ components using this TV’s remote control.
Preparation:
•
Connect the plug of the external component to the wall outlet.
•
Make sure the component is turned off.
1
TV
VCR
DVD
DBS
RCVR
CBL
AUX
2
POWER
+
CH
VOL
CH
VOL
OK
1
2
3
4
5
6
7
8
0
9
3
Press and hold
POWER
and
OK
together,
for at least
5 seconds
.
•
The mode selection buttons flashes, and then release
the
POWER
and
OK
.
Select the type of the component.
•
The selected button light and all others go out.
Enter the 3-digit infrared code (see pages 60-62).
•
Factory default setting : Panasonic
•
Press
POWER
to test the operation.
Notes:
• If the component does not operate with the Remote Control, repeat the procedure
using another code. (Some brands have multiple codes).
• If an incorrect code is entered, or if the procedure takes longer than 30 seconds,the
programming will fail.
MENU
PLAY
PROG
EXIT
LIGHT
A -ANTENNA - B
SAP
AS
PECT
M
U
TE
RE
CA
LL
BBE
STOP
PAUSE
REC
CH
VOL
CH
VOL
OK
TV/VIDEO
1
2
3
4
5
6
7
8
0
9
PIP MIN
REW
PIP MAX
FF
FREEZE
TV/VCR
PIP
SPLIT
MOVE
SWAP
SEARCH
OPEN/CLOSE
SPLIT CH
DVD/VCR CH
CBL
TV
VCR
DVD
DBS
RCVR
AUX
R-TUNE
POWER
After selecting the type of component (step 2, above)
1
2
Press to store the code.
CH
VOL
CH
VOL
OK
Press to select the code.
• The code starts from the current device.
• Press
POWER
button to test the operation.
• Repeat the steps until the component code is found.
It may take many attempts before the correct code is
found.
CH
VOL
CH
VOL
OK
To find a code not listed in the index