36
Setup
CH
VOL
CH
VOL
OK
Press to select the menu.
Press to display the sub-menu.
Press to select the antenna mode.
Press to enter your selection.
• The confirmation message appears.
CH
VOL
CH
VOL
OK
Input Setup
Cable/Antenna
Auto Scan
Setting
Manual Program
Signal Meter
Language
Program Channel
1
2
CH
VOL
CH
VOL
OK
Press to select Input Setup.
Press to enter the sub-menu field.
3
CH
VOL
CH
VOL
OK
Press to start Auto Scan.
All available channels with a signal will be programmed into memory.
Notes:
• Auto Scan is necessary when you select the input signal for the first time or whenever you change the antenna
configuration.
• If CableCARD
TM
is not inserted, the Auto scan performs Scan All.
• When CableCARD
TM
is inserted and Cable only is selected, Auto Scan will be skipped.
• When CableCARD
TM
is inserted and Cable/Antenna is selected, Antenna (B) Analog & Digital Auto Scan will be
performed.
• In order to manually select Antenna B from the remote, Auto Scan must first be performed.
Menu Navigation
Input Setup
Lets you specify the antenna mode (Cable only, Cable/Antenna or Antenna only).
Program CH
Press the MENU key to activate the main menu and select Setup. (refer to page 24)