79
English
6
Select [YES] with and press
<ENTER>.
Data copy to the USB memory starts.
The data will be overwritten when any data exists originally.
Are you OK to write the data?
Data to USB Memory
YES
NO
The following message is displayed after data copy
has finished.
Data copy finished.
7
After data copy has finished, remove
the USB memory device from the USB
terminal.
Copying the USB memory data to the
display
1
Insert the USB memory device, which
the data has been copied, to the USB
terminal of the display for data copy
(same as the step 1 on page 78).
Note
●
If the USB memory containing the data for cloning
is connected in power-on state, the [Select Copy
Type] message in step 5 is displayed. Select [USB
Memory → Display].
2
Display [Setup] menu pressing
<SETUP>.
3
Select [OSD Language] with
and
press <ENTER> for over 3 seconds.
The following display appears.
Options
Display serial number
Shipping
USB data cloning
Software licenses
4
Select [USB data cloning] with
and press <ENTER>.
5
Select [USB Memory → Display] with
and press <ENTER>.
Select Copy Type
Display → USB Memory
USB Memory → Display
6
Select [YES] with and press
<ENTER>.
Data copy to the display starts.
Do you copy the data?
Data from USB Memory
YES
NO
The following message is displayed after data copy
has finished.
Cloning finished.
Please turn off the power.
7
After data copy has finished, remove
the USB memory device from the USB
terminal.
8
Press the power switch (
) of the
display unit to turn the power OFF,
and turn the power ON again.
The copied content is applied to the display.