English
32
■
Scenario
The play order and time can be specified for a play
file. Save under the name “scenario.dat” immediately
below root in USB memory.
●
Save files as UTF-8N format.
■
File list
It is a list of play files. Save under the name “filelist.
dat” immediately below root in USB memory.
●
Save files as UTF-8N format.
■
Scenario- / File list-associated terms
File name
It is the name of a play file.
A file name needs to include its extension.
Example)
introduction.jpg
Contents_video01.wmv
●
Enter the extension of a file name using one-byte
alphanumeric characters.
File definition
It is a file definition that is shared among scenarios
and files.
PHOTO_”xxx”: still image file definition
VIDEO_”xxx”: moving image file
definition
●
The “xxx” portion can be set from 001 to 999.
●
Enter a file definition using one-byte alphanumeric
characters.
Play time
It is the play time of a file.
Play time can be specified from 3 seconds to 24
hours. (Unit: second)
Example)
3:
3 seconds
86400:
24 hours
10.5:
10.5 seconds It can be set
down to one-tenth (1/10) of a
second using a decimal point
(full stop).
Play time is omissible.
For still images, a file will be played for the period of
time that you selected in [USB media player settings]
- [Slide show duration]. (see page 56)
For moving images: a file will be played for the
duration of the play time of the file.
●
Enter play time using English one-byte characters.
●
When playing back large sized files, if you set the
playing back duration short, it may not be played
back properly, for example, noise appears on the
screen. In that case, set the playing back duration
longer (10 seconds or longer).
Group ID (for Multi Media Player)
It is an ID used for grouping on a network during Multi
Media Player conditions.
GroupID:Gxx : Group xx
The “xx” portion can be set from 01 to 10.
●
Enter a group ID using one-byte alphanumeric
characters.
NOTE
●
“UTF-8N”:UTF-8 encoding without BOM. Notepad
for windows doesn’t support this encoding. Please
use another editor supported UTF-8 encoding
without BOM.
Playing back the files
■
Example of setting in each mode
Single Media Player Type1
Files will be played in the order in which their names
appear in USB memory.
Scenario and file list
Scenario:
Unnecessary
File list:
Unnecessary
Setting example
USB memory contents
001_Introduction.jpg
002_Contents_Video1.wmv
003_Contents_Video2.wmv
004_Contents_Video3.wmv
Play contents
For the above setting example, the following contents
will be played on repeat (loop).
1. 001_Introduction.jpg
(*1)
2. 002_Contents_Video1.wmv (*2)
3. 003_Contents_Video2.wmv (*2)
4. 004_Contents_Video3.wmv (*2)
*1 Played for the duration set in [Slide show duration].
*2 Played for the duration of the play time of the file.
Single Media Player Type2
Files will be played in the order they were listed in a
scenario.
Scenario and file list
Scenario:
Enter [File name: Play time].
File list:
Unnecessary
Setting example
USB memory contents
scenario.dat
Introduction.jpg
Contents_Video1.wmv
Contents_Video2.wmv
Contents_Video3.wmv
