Panasonic TH-42PF30ER Скачать руководство пользователя страница 50

Страница: 50 / 71

Setup for Input Signals

• Sync

This function operates only during input from PC IN terminal.

Setting RGB sync signal

Con rm that the input is set to RGB input (this setting is valid only for RGB input signal).

Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.

on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.

VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.

Setting Component sync signal

Con rm that the input is set to Component input (this setting is valid only for Component input signal).

Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.

on Y: Uses a synchronized signal on the Video Y signal, which is input from the Y connector.

Note:

Signals input to COMPONENT/RGB IN terminals correspond to Sync on G or Sync on Y.

• SDI Through

Set the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).

Off

On:

Enables active through.

Off:

Disables active through.

Note:

Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board
(TY-FB11DHD) is selected.

• FRAME CREATION

Automatically compensates the picture frame rate and removes juddering movements to make the images
smooth.

Off

Min*

Mid

Max

* “Min” can be selected during 2D viewing.

Note:

Depending on the contents, images may be noisy. To prevent the noise, change the setting.

• 3D Refresh Rate

Reduces juddering or icker of image due to lighting interference during 3D viewing.

100Hz

120Hz

Note:

This setting is disabled when “FRAME CREATION” is set to “Off”.

• HDMI Range

Switches the dynamic range according to the input signal from HDMI terminal.

Video(16-235)

Full(0-255)

Auto

Video(16-235):

If the input signal is the video range, Example: HDMI terminal output for DVD player

Full(0-255):

If the input signal is full range, Example: HDMI terminal output for personal computer

Auto:

Switches the dynamic range automatically between “Video(16-235)” and “Full(0-255)” according to the input signal.

Note:

This function can be set only for HDMI signal input.

• SDI Signal Format

This menu is available only when selecting a slot that the Dual HD-SDI Terminal Board for 3D (TY-FB30DHD3D) is
installed and set the input signal format for the board.
Auto

YCbCr(4:2:2) 10bit

YCbCr(4:2:2) 10bit 60p/50p

YCbCr(4:4:4) 10bit

RGB(4:4:4) 10bit

YCbCr(4:2:2) 12bit

YCbCr(4:4:4) 12bit

RGB(4:4:4) 12bit

XYZ(4:4:4) 12bit

Auto:

Automatically selects the signal format according to the input signal.

Содержание TH-42PF30ER








































































Результаты поиска

Содержание TH-42PF30ER

Отзывы:

Похожие инструкции для TH-42PF30ER

Бренды по названию

Популярные бренды

Panasonic TH-42PF30ER, Руководство по эксплуатации

Результаты поиска

Содержание TH-42PF30ER

Отзывы:

Похожие инструкции для TH-42PF30ER

Бренды по названию

Популярные бренды