Panasonic TH-42BT300U, Руководство по эксплуатации

Страница: 48 / 76

48
SETUP menu
MARKER SETTINGS
Various markers for editing image are displayed.
Notes:
• This function is available when “Studio mode” in OPTIONS menu is set to “On”
• This function is disabled during 3D images.
• An aspect of “4:3” or “FULL” is valid for this function. Only an aspect of “FULL” is valid at the input of HD signal.
2
access
1
select
Select the item and set.
2
change
1 select
Marker display settings
• MARKER
Set show/hide of the marker.
OFF: The marker is not displayed.
PRESET1 / PRESET2: The marker is displayed by PRESET1 or 2 setting. You can con gure the display setting of PRESET1/2.
• You can also display the marker with the FUNCTION button on the remote control (see page 63).
• TIME OUT (5 MIN)
Set the marker display time-out.
ON: The marker display disappears in 5 minutes (time out).
OFF: The marker display time-out does not occur.
Marker advanced settings
• 16 : 9
Select 16:9 marker display and the marker type.
OFF
4:3(1.33) 13:9(1.44) 14:9(1.55) CNSCO(2.39) VISTA(1.85) 95% 93%
90% 88% 80% USER
• This setting is valid only if an aspect of “FULL” is used.
Aspect marker
4:3, 13:9, 14:9, CNSCO, VISTA
4:3 marker CNSCO marker (2.39:1) VISTA marker (1.85:1)
Safe area marker
95%, 93%, 90%, 88%, 80%, USER
90% Area marker
• Selecting USER allows the marker area set in 1% increments in “MARKER SIZE
(%)” to be re ected in the con guration of safe area marker.
EXTERNAL SCALER MODE
POWER SAVE OFF
OFF
SIGNAL
MARKER SETTINGS
WAVEFORM MONITOR
SCREENSAVER
EXTENDED LIFE SETTINGS
INPUT LABEL
FUNCTION BUTTON SETTINGS
ON/OFF TIMER SETUP
DAY/TIME SETUP
NETWORK SETUP
RGB/MONO SETTINGS
COMPONENT/RGB-IN SELECT
3D SETTINGS
RGB
PRESET 1 MARKER
90% 16:9
OFF TIME OUT (5 MIN)
MARKER SIZE(%)
COLOR
MARKER SETTINGS
BRIGHTNESS 3
80%
4:3
MARKER SIZE(%)
COLOR
BRIGHTNESS
CENTER
COLOR
BRIGHTNESS
CROSS HATCH
COLOR
BRIGHTNESS
ON
OFF
RED
GREEN
BLUE
3
3