background image

24

Troubleshooting for 3D Eyewear 

Table of images that can be seen for each 3D Picture 
Format and the source image format

Symptoms

Checks

Cannot see 3D images

•  Has the 3D Eyewear been switched On?
•  Ensure that “3D FUNCTION” in “3D SETTINGS” is set to “ON”. (see 

page 44)

•  Some 3D image signals may not be automatically recognized as 3D 

images. Set “3D INPUT FORMAT” in “3D SETTINGS” to match the 
picture format. (see page 44)

•  Check if 3D IR TRANSMITTER is turned on and corrected properly.
•  Check that there are no obstacles between the 3D IR TRANSMITTER 

and the 3D Eyewear. If the 3D Eyewear stops receiving the infrared 
signal for about 5 minutes, the 3D Eyewear will be turned off 
automatically.

•  Check the available area to use the 3D Eyewear.
•  Depending on the person, the 3D images may be dif cult to see, or 

cannot be seen, especially in users that have a different level of eyesight 
between the left and right eyes. 
Take the necessary steps (wearing glasses etc.) to correct your eyesight 
before use.

3D Eyewear is turned off automatically

•  Check that there are no obstacles between the 3D IR TRANSMITTER 

and the 3D Eyewear or that the 3D Eyewear is placed inside the 
coverage area. If the 3D Eyewear stops receiving the infrared signal for 
about 5 minutes, the 3D Eyewear will be turned off automatically.

There is something wrong with the 3D 
images

•  Switch “SWAPPED” and “NORMAL” under “LEFT/RIGHT SWAP” in “3D 

SETTINGS” (see page 44).

Indicator lamp will not light when the 3D 
glasses are turned ON.

•  The battery may be running low or  at. Change the battery or charge the 

3D glasses.

If the picture appears to be abnormal, refer to the table below to choose the correct 3D picture format setting.

3D INPUT FORMAT

Source image 
format

AUTO

SIDE BY SIDE

TOP AND BOTTOM

NATIVE

Side by side

*

1

Normal*

2

Top and bottom

*

1

Normal*

2

Normal format 

(2D)

Normal

Normal

*1

 When the source image is not recognized correctly

*2

  When “3D FUNCTION” is set to “ON”, the images will be displayed with 3D effect. When set to “OFF”, displayed 

without 3D effect.

•  Depending on the player or contents, the image may be different from the above illustrations.

Viewing 3D images

Содержание TH-42BT300U













































































Отзывы: